Loading...
This DIVYE 6.3 mm Spade Crimp Terminal Connector Set of 20 is a pack of insulated male‑female quick‑disconnect crimp terminals, designed to make wire connections fast, secure, and safe — without soldering. Each connector features a tin‑plated brass (or copper alloy) contact with an insulated sleeve and a robust crimp‑on barrel, suitable for a variety of automotive, appliance, industrial and DIY wiring applications. The connectors are flexible enough for light to medium electrical loads and are ideal wherever modular, detachable wiring is required.
The set gives you 20 connectors in one go — enough for multiple wiring jobs or as spare inventory — offering excellent value for money and convenience for mechanics, electricians, hobbyists and households alike.
This product suits:
Automotive mechanics and DIY vehicle‑owners (cars, bikes) doing wiring, horn/light/ battery harness connections.
Home‑appliance repair or installation technicians working on fans, lights, machines, or small home‑electrical wiring.
Hobbyists, electronics enthusiasts, small workshops needing quick wiring solutions — audio systems, power supplies, control boxes, etc.
Electricians or maintenance workers needing insulated, safe, removable connectors for machines, control panels or household wiring.
Anyone who prefers solder‑free, modular wiring solutions for easy maintenance, component replacement, or upgrades.
Solder‑free convenience: Crimp‑on design — no soldering required — makes wiring faster and more accessible, ideal for DIY or quick repair jobs.
Safe & insulated connections: PVC/vinyl insulation covers the metal contacts to protect from short‑circuits, moisture, dust or accidental contact.
Strong & durable electrical contacts: Tin‑plated brass contacts (often with internal copper sleeve) give good conductivity, corrosion resistance and reliable long-term performance even under stress or vibration.
Quick‑disconnect flexibility: Male‑female spade pair allows easy plug‑and‑play — useful for maintenance, component replacement, or modular wiring setups.
Versatile for multiple applications: Suitable for automotive wiring, home appliances, electronics projects, industrial control wiring — basically any system using standard 6.3 mm spade terminals. Cost‑effective bulk pack: 20 connectors in one pack — gives enough quantity for multiple jobs or spares, saving cost over buying individually.
Standard 6.3 mm (0.250 inch) spade/tab size — compatible with common quick‑disconnect terminals.
Insulated sleeve (PVC/vinyl) to cover the connector body for safety and protection.
Tin‑plated brass (or copper alloy) contact body for conductivity and corrosion resistance.
Double‑crimp (barrel + internal sleeve) design for strong mechanical grip and reliable electrical contact, even under vibration or stress.
Quick‑disconnect male & female pair — easy to plug/unplug without tools once crimped.
| Specification | Detail |
|---|---|
| Connector type | 6.3 mm spade / quick‑disconnect male + female crimp terminal |
| Contact material | Tin‑plated brass (or copper alloy) |
| Insulation | PVC / vinyl insulated sleeve (colour‑coded for wire gauge) |
| Wire gauge compatibility | Typically 16 AWG to 14 AWG (≈ 0.5 mm² to ~2.5 mm²) — depending on variant |
| Tab / blade size | 6.3 mm × ~0.8 mm (standard spade quick‑disconnect dimension) |
| Termination method | Crimp (no solder) |
| Pack quantity | 20 connectors (male + female pairs) |
| Typical voltage/current suitability* | Suitable for general wiring tasks; check wire gauge and load for safety. |
Strip the insulation off the wire end (about 6–8 mm), ensuring the conductor strands are clean and untwisted.
Insert the stripped wire fully into the crimp barrel — ensure no bare conductor remains exposed beyond insulation.
Using a proper crimping tool (preferably ratchet‑type), position the barrel in the correct die size and compress until the crimp cycle completes — ensures tight, reliable crimp.
Inspect the crimp — the wire should not pull out, insulation should sit flush to barrel, and no exposed metal should be visible.
Connect the male tab of the counterpart terminal into the female insulated receptacle — the quick‑disconnect interface completes the circuit reliably.
Ensure connectors are used within recommended current/wire‑gauge limits to avoid overheating or poor contact.
Avoid excessive bending or pulling of wires — strong crimp but mechanical stress over time may loosen connection.
For applications subject to vibration (vehicles, machines), inspect connections periodically and re‑crimp or replace if signs of wear or loosening appear.
Keep connections dry and away from corrosive environments; while tin‑plated brass resists corrosion, prolonged exposure to damp or salty air may degrade performance.
Confirm the wire gauge you are using — match connector barrel size and insulation colour code (e.g. red for 0.5–1.5 mm², blue for 1.5–2.5 mm²) for best fit and secure crimp.
Ensure your wiring tab/bblade is 6.3 mm — otherwise connector may not fit or will be loose.
Use a proper crimping tool — avoid cheap pliers or hammering, which often yield poor crimps and unreliable connections.
For automotive or vibration‑prone applications, consider double‑crimp with internal sleeve & insulated connectors — like this set — for better durability.
Keep spare connectors — a pack of 20 provides flexibility and readiness for multiple jobs or maintenance.
When ordered via ipshopy:
Product packed securely to protect connectors and avoid insulation or terminal damage.
Delivered across India via standard courier or parcel service.
Option for prepaid and Cash‑on‑Delivery (COD), depending on user preference.
Returns accepted if the product arrives damaged, defective or is not as per specification.
Return request must be made within a short standard window (e.g. 7 days of delivery), with connectors unused and original packaging intact.
Because these are electrical components, opened / crimped connectors cannot be returned for hygiene / safety reasons (once used).
Guaranteed specification compliance — genuine insulated 6.3 mm spade crimp connectors, not cheap unverified imports.
Bulk pack value — 20 connectors in one set — ideal for multiple projects or maintenance inventory.
Clear compatibility & wiring guidance — we provide full specs and advice on wire gauge, crimping, usage — helpful especially for DIY users and small workshops.
Reliable delivery & safe packaging across India — ensures product reaches you intact and ready to use.
Value for money — quality components at affordable price, suitable for both occasional repairs and frequent wiring jobs.
Support & service — for any order issues or queries, ipshopy offers customer support, helping you make the right selection and ensuring satisfactory purchase.
